DGCA Technical General: Ice & Rain Protection Questions

74 exam-style Ice & Rain Protection questions for the DGCA Technical Generalpaper (CPL & ATPL). The first 12 are free below with answers and explanations — sign up free to practise all of them with progress tracking.

  1. Q1

    The areas heated by a typical bleed air anti icing system include?

    • ALeading and trailing edges
    • BLeading edges, leading edges flaps and slats, and engine air intake lips
    • CTrailing edge flaps
    • DThe entire wing surface
    Show answer

    Correct answer: B. Leading edges, leading edges flaps and slats, and engine air intake lips

    This Explanation is Coming Soon

  2. Q2

    In a bleed air anti icing system the areas that are heated are

    • A The whole of the wing
    • B Wing leading edge slats and flaps
    • C Wing leading edges and slats
    • DTrailing edge flaps
    Show answer

    Correct answer: C. Wing leading edges and slats

    A bleed-air (hot air) anti-icing system pipes hot compressor air to the wing leading edges and to the leading-edge slats, the surfaces most prone to ice accretion. Flaps and the rest of the wing are not heated.

  3. Q3

    What ice protection system is used on most modern jet transport aircraft

    • A Liquid
    • B Electrical
    • C Hot air
    • D Pressure operated boots
    Show answer

    Correct answer: C. Hot air

    Most modern jet transport aircraft protect leading edges and engine intakes with hot air bled from the engine compressors, ducting this heat to prevent ice forming on the critical surfaces.

  4. Q4

    Anti icing/de icing of the wings of a modern turbo-prop aircraft is typically achieved using?

    • AHot air.
    • BLiquids
    • CPneumatic boots
    • DElectrical heaters
    Show answer

    Correct answer: C. Pneumatic boots

    This Explanation is Coming Soon

  5. Q5

    389.In flight airframe icing does not occur:

    • Aabove 25 000 feet.
    • Babove 40000 feet
    • Cabove 35 000 feet.
    Show answer

    Correct answer: B. above 40000 feet

    Above about 40,000 feet the ambient temperature is generally below -40 degrees C, at which supercooled water droplets can no longer exist; any moisture is present only as ice crystals, which do not adhere to the airframe, so structural icing does not occur.

  6. Q6

    On a modern turbo prop aircraft the method of anti-icing/de-icing the wings is?

    • A Fluid
    • B Pneumatic boots
    • C Electrical heater mats
    • D Hot air bled from the engines
    Show answer

    Correct answer: B. Pneumatic boots

    Turboprop aircraft typically de-ice the wing leading edges with pneumatic rubber boots that inflate to crack and shed accreted ice, as they usually lack the large volume of engine bleed air that big jets use for hot-air anti-icing.

  7. Q7

    What is the effect of heating flight deck windows

    • A To demist the interior of the window if normal demist does not function correctly
    • B To protect the windows against bird strike
    • C To protect the windows against ice formation
    • D To protect the windows against bird strike and ice formation
    Show answer

    Correct answer: D. To protect the windows against bird strike and ice formation

    Electrically heated flight-deck windows serve two purposes: keeping the outer surface clear of ice and, by warming the laminated panel, making it more pliable and resilient so it better withstands a bird strike. The heat therefore protects against both ice and bird impact.

  8. Q8

    Windscreen heating system?

    • AIncrease the danger of damage in the event of a bird strike
    • BUse engine bled air to heat the centre section only
    • CUse engine bleed air to heat the entire screen
    • DUse electrical system to maintain constant temperature across the entire screen
    Show answer

    Correct answer: D. Use electrical system to maintain constant temperature across the entire screen

    This Explanation is Coming Soon

  9. Q9

    Electrically heated turbo-prop propeller system?

    • AProvide de-icing and use a 10 second working cycle
    • BProvide de-icing using a frequency to 10 cycles per second
    • CProvide anti-icing and use a 10 second working cycle
    • DProvide anti-icing using a frequency of 10 cycles per second
    Show answer

    Correct answer: A. Provide de-icing and use a 10 second working cycle

    This Explanation is Coming Soon

  10. Q10

    431.How is ice prevented from forming on the front windshield of large systems

    • AWarm air is blown over the windshield
    • BDe-Icing fluid are spread
    • CElectrically heated windshields
    Show answer

    Correct answer: C. Electrically heated windshields

    Large aircraft prevent ice on the front windshield with transparent conductive films laminated within the glass, electrically heated and thermostatically controlled; the heating also keeps the panel resilient against bird strike.

  11. Q11

    Windscreens are kept clear in heavy rain by using?

    • ALiquid repellents
    • BWindscreen wipers
    • CBleed air
    • DAll of the above
    Show answer

    Correct answer: B. Windscreen wipers

    This Explanation is Coming Soon

  12. Q12

    Hot air anti-icing is provided to?

    • ALeading edges only
    • BLeading edges and flaps
    • CLeading edge flaps and slats
    • DLeading edges plus leading edge flaps and slats
    Show answer

    Correct answer: D. Leading edges plus leading edge flaps and slats

    This Explanation is Coming Soon

62 more Ice & Rain Protection questions in the full bank

Create a free account to practise every Ice & Rain Protection question with instant scoring, chapter tests, previous DGCA papers and full-length mock exams.

Start practising free

More DGCA Technical General topics